Jet Tools DC-1200C User Manual Page 1

OWNER'S MANUALDC-1200C Dust CollectorJET EQUIPMENT & TOOLS, INC. P.O. BOX 1349 Phone:253-351-6000A WMH Company Auburn, WA 98071-1349 Fax: 1-8

10Parts Breakdown for DC-1200C Dust Collector w/Canister Filter

11Parts List for the DC-1200C Dust Collector w/Canister FilterIndex PartNo. No. Description Size Qty.1...708739... Filter

12Index PartNo. No. Description Size Qty.53...TS-1490031... Hex Head Bolt ...M8x20...

2This manual has been prepared for the owner and operators of JET’S DC-1200C. Its purpose, asidefrom machine operation, is to promote safety through t

3WARNING1. Read and understand the entire contents of this manual before attempting assembly oroperation. Do not use this machine until proper trainin

4Specifications: DC-1200CStock Number...

5WARNINGRead and understand the entire contents ofthis manual before attempting assembly oroperation of the dust collector!Failure to comply may cause

6Assembly1. Install four casters to the under side of thebase as pictured in Fig. 1. Thread the hexnut (B, Fig. 1) onto the caster shaft. Thenslide th

74. Attach three support brackets (A, Fig. 4) tothe base using six M8 x 16 hex cap boltsand six M8 flat washers (B, Fig. 4). Handtighten only at this

87. Place the ring over the top of the plastic bagand fold over the bag approximately threeinches, Figure 7.8. Insert the snap ring (A, Fig. 8) of the

9Electrical ConnectionsWARNINGAll electrical connections must be done by aqualified electrician. All adjustments orrepairs must be done with the dust