Jet Tools Saw JWCS-10A User Manual

OWNER'S MANUALJWCS-10A Cabinet SawJWCS-10A-PF ShownJET EQUIPMENT & TOOLS, INC. P.O. BOX 1349 Phone:253-351-6000A WMH Company Auburn, WA 98071

105. Insert front tab of blade guard splitterthrough insert opening in table and onto hexcap bolt (A, Fig.7). Hand tighten only at thistime.6. Insert

11Table Insert Adjustment• Hardware: Table Insert• Tools: 3mm Hex Wrench, Straight Edge1. Lower blade completely.2. Place the open end of the insert

12WARNINGWhen making adjustments alwaysdisconnect saw from the power source!Failure to comply may cause serious injury!Adjusting 45°°°° and 90°°°° Pos

13Wear Adjustment in Tilting Mechanism1. Disconnect the saw from the powersource.2. Loosen lock nut (A, Fig. 15).3. Turn eccentric sleeve (B, Fig. 15)

14TroubleshootingTrouble Possible Cause SolutionSaw stops or will not start1. Overload tripped on motor2. Saw unplugged from wall ormotor3. Fuse blown

15Cabinet & Table Assembly

16Parts List For The JWCS-10A Cabinet & Table AssemblyIndex PartNo. No. Description Size Qty.1...290001W ... Table...

17Index PartNo. No. Description Size Qty.52...990805... Self Tapping Screw... M4x10

18Motor & Trunnion Assembly

19Parts List For The JWCS-10A Motor & Trunnion AssemblyIndex PartNo. No. Description Size Qty.1...200035... Eccen

2Important Information2-YEAR JET offers a two-year limitedLIMITED WARRANTY warranty on this productREPLACEMENT PARTSReplacement parts for this tool ar

20Index PartNo. No. Description Size Qty.54...200102... Flange...

21

3WARNING1. Read and understand the entireinstruction manual before attemptingassembly or operation.2. This table saw is designed and intendedfor use b

4Grounding InstructionsCaution: This tool must be grounded while in use to protect the operator from electric shock.In the event of a malfunction or b

5230 Volt OperationIf 230V, single phase operation is desired, the following instructions must be followed:1. Disconnect the machine from the power so

6Table of ContentsWarranty ...

7WARNINGRead and understand the entire contents ofthis manual before attempting assembly oroperation!Failure to comply may cause serious injury!Conten

8WARNINGDo not connect the table saw to the powersource until all assembly has beencompleted!Failure to comply may cause serious injury!Installation a

9Hand Wheel Assembly• Hardware: (2) Handles, (2) Hand Wheels & (2)Lock Knobs• Tool: 14mm Wrench1. Attach handle (A, Fig. 4) to hand wheel (B,Fig