Jet-tools JDS-12B User Manual download pdf (Page 12)

12

Canister Filter (optional accessory)

1. Remove the inlet port that came with the

sander.

2. Mount the plastic elbow (A, Fig. 9) to the

sander using the same hardware (B, Fig. 9)

from the inlet port.

3. Connect the filter (C, Fig. 9) to the elbow

and turn counter-clockwise so that it locks in

place.

WARNING

Static electricity will build up in the filter

during operation. The filter ground must be

attached to the machine ground, and to the

filter. Failure to comply may result in

fire/loss of property, or personal injury!

4. Remove the screw (D, Fig. 9) from the

sander base. Attach the end of the

grounding wire to the screw and thread back

in to the base.

5. Attach the grounding clip (E, Fig. 9) to the

metal part of the filter. This will prevent

static electricity from building up in the filter.

Cleaning the Filter

CAUTION

Wearing a particle mask/respirator for

protection against fine dust particles during

cleaning is highly recommended.

Clean the canister filter frequently to keep the

sander’s performance at its optimum. To clean:

1. Disconnect the machine from the power

source.

2. Take off the grounding clip and remove the

filter (C, Fig. 9) by turning clockwise.

3. Empty the contents into an appropriate

container.

4. The filter can be cleaned with a low

pressure air hose. Blow from the outside of

the filter to clean the dust particles. For

best results check and empty the filter

frequently.

5. Install the filter and reattach the grounding

clip.

Optional Accessories

708438: Open Stand

708434: Canister Filter

57620025: JET Stik Abrasive Belt and Disc

Cleaner.

Dust Collectors and Accessories see a JET

Distributor.

JDS-12B Sanding Disc PSA Aluminum Oxide

“J” Weight Cloth Back.

12” 36 Grit 50 Grit 60 Grit

Stock

Number

57698525 57698650 57698750

Master

Carton

25 50 50

12” 80 Grit 100 Grit 120 Grit

Stock

Number

57698850 57698950 57699050

Master

Carton

50 50 50

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments