Jet Tools JMS-12SCMS User Manual download pdf (Page 12)

Assembl

Unlocking the Slide Carriage

Loosen the slide carriage lock knob (A).

When transporting or storing the miter saw, the

slide carriage (B) should always be locked in

position.

Releasing the Cutting Head

When not in use, lock the

cutting head in the down position. Failure to

comply can cause serious injury or damage

equipment.

Unlocking

1. Push down on the switch handle (page 10).

2. Pull out the hold-down latch (A, Fig. 2).

3. Raise the cutting head to the up position.

Locking

Note: When not in use, lock the cutting head in the

down position.

1. Push the cutting head down

2. Press the hold-down latch (A, Fig. 2) in to lock.

Important: Always use the carrying handles when

lifting or moving to avoid damage to the machine.

Installing the Dust Bag

1. Squeeze the metal collar wings (B, Fig. 3) of

the dust bag (A, Fig. 3).

2. Place the dust bag neck opening around the

exhaust port (C, Fig. 3), and release the collar

wings (B).

To empty the dust bag, remove from exhaust port,

open zipper on underside of bag and empty into

waste container.

Note: Check and empty bag frequently. Do not wait

for it to get full.

Figure 1

Figure 2

Fif

Figure 3

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

No comments

Jet Tools JMS-12SCMS User Manual Page 12